Manuals / Multiquip / Kitchen Appliance / Garbage Disposal

Multiquip manual MVC-70E/EW Inspection, Before Starting, Engine Oil Check, Gasoline Check

Models: MVC-70E/EW

1 62
Download 62 pages 16.6 Kb
Page 16
Image 16

Before Starting

1.Read safety instructions at the beginning of manual.

2.Cleanthecompactor,removingdirtanddust.Particularly,the bottom of the plate, engine cooling air inlet, carburetor and air cleaner.

3.Checktheairfilterfordirtanddust.Iftheairfilterisdirty,blow through the air filter cartridge from the inside, moving a jet of dry compressed air up and down until all dust is removed. Otherwise replace air filter with a new one.

4.Check carburetor for external dirt and dust. Clean with dry compressedair.

5.Check fastening nuts and bolts for tightness. Loosened screws or bolts due to vibration, could lead to unexpected accident.

Engine Oil Check

1.To check the engine oil level, place the plate compactor on secure level ground with the engine stopped.

2.Remove the filler cap/dipstick from the engine oil filler hole (Figure 5) and wipe it clean.

MVC-70E/EW — INSPECTION

The Oil Alert system will automatically stop the engine

NOTE before the engine falls below safe limits. Always be sure to check the engine oil level prior to starting the engine.

Table 4. Oil Type

Season

Temperature

Oil Type

 

 

 

Summer

25°C or Higher

SAE 10W-30

 

 

 

Spring/Fall

25°C~10°C

SAE 10W-30/20

 

 

 

Winter

0°C or Lower

SAE 10W-10

 

 

 

Gasoline Check

1.Remove the gasoline cap located on top of fuel tank.

2.Visuallyinspecttoseeiffuellevelislow. Iffuelislow,replenish with unleaded fuel.

3.When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. Wipe up any spilled fuel.

Vibrator Oil Check

1.Place the MVC-70E/EW plate compactor horizontally on a flatsurface.Makesurethecompactorislevelwhenchecking the oil in the vibrator assembly.

2.Check vibratoroillevelbyremoving theplug (vibrator oilgauge) as shown in Figure 7. The oil level should be up to the oil plug. If oil is required, replace using only SAE 10W-30 motor oil.

Figure 5. Engine Oil Dipstick

3.Insertandremovethedipstickwithoutscrewingitintothefiller neck. Check the oil level shown on the dipstick.

4.If the oil level is low (Figure 6), fill to the edge of the oil filler hole with the recommended oil type (Table 4).

UPPER LIMIT

Figure 7.Vibrator Oil Plug

LOWER LIMIT

Figure 6. Engine Oil Dipstick

PAGE 16 — MVC-70E/EW PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (01/25/06)

Page 15 Page 17
Page 16
Image 16
Multiquip manual MVC-70E/EW Inspection, Before Starting, Engine Oil Check, Gasoline Check, Vibrator Oil Check
Page 15 Page 17

MVC-70E/EW specifications

The Multiquip MVC-70E/EW is a high-performance vibratory compactor designed for efficient soil and asphalt compaction applications. This machine comes equipped with advanced features and technologies that enhance its functionality, delivering outstanding results in various construction and civil engineering projects.

One of the standout features of the MVC-70E/EW is its powerful engine, which provides exceptional torque and horsepower. This ensures that the machine can handle challenging compaction tasks, such as compacting cohesive soils, gravel, and asphalt. The fuel-efficient engine is not only reliable but also designed to minimize emissions, making the MVC-70E/EW environmentally friendly.

The compactor's design focuses on operator comfort and ease of use. It includes an ergonomic handle that can be adjusted to different heights, allowing users of various statures to operate the machine comfortably. The padded grip helps reduce vibration transmitted to the operator, enhancing overall comfort during extended operation periods.

Another key characteristic of the MVC-70E/EW is its innovative vibration system. This system utilizes advanced technology to provide uniform compaction, ensuring that the surface is adequately compressed without causing damage. The machine is capable of achieving deep effective compaction depths, making it suitable for a range of applications, from compacting base layers to finishing surfaces.

The MVC-70E/EW also features a large, heavy-duty plate that enhances stability and performance. The plate’s dimensions allow for efficient coverage and quick work progress, making the compactor ideal for both small and large projects. Additionally, the model's durable construction means it can withstand the rigors of tough job sites, ensuring longevity and reduced maintenance needs.

For versatility, the MVC-70E/EW is equipped with a water sprinkler system, which helps to keep the plate moist during asphalt compaction. This feature minimizes asphalt stickiness and provides a smoother surface finish. The unit also boasts a low center of gravity, maintaining stability even when operating on uneven terrain.

In summary, the Multiquip MVC-70E/EW is a robust, versatile vibratory compactor that combines performance, comfort, and durability. With its powerful engine, innovative vibration technology, ergonomic design, and enhanced safety features, it stands out as an excellent choice for professionals seeking reliable compaction equipment. Whether for road construction, landscaping, or utility work, this compactor is built to meet the demands of the job efficiently.