Multiquip MVC80VH/VHW manual Inspection and Maintenance ServiceTables

MAINTENANCE

CAUTION

Inspection and other services should always be carried out on hard and level ground with the engine shutdown.

Inspection and Maintenance ServiceTables.

1.To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7.

CAUTION

These inspection intervals are for operation under normal conditions. Adjust your inspection intervals based on the number hours plate compactor is in use, and particular working conditions.

CAUTION

Fuel piping and connections should be replaced every 2 years.

Table 5. Engine Maintenance Schedule

			FIRST		EVERY	EVERY	EVERY	EVERY
DESCRIPTION (3)	OPERATION	BEFORE	MONTH		3 MONTHS	6 MONTHS	YEAR	2 YEARS
			OR		OR	OR	OR	OR
			10 HRS.		25 HRS.	50 HRS.	100 HRS.	200 HRS.
Engine Oil	CHECK	X
	CHANGE		X
Air Cleaner	CHECK	X
	CHANGE				X (1)
All Nuts & Bolts	Re-tighten If	X
	Necessary
Spark Plug	CHECK-CLEAN					X
	REPLACE							X
Cooling Fins	CHECK					X
Spark Arrester	CLEAN						X
Fuel Tank	CLEAN						X
Fuel Filter	CHECK						X
Idle Speed	CHECK-ADJUST						X (2)
Valve Clearance	CHECK-ADJUST							X (2)
Fuel lines	CHECK			Every 2 years (replace if necessary) (2)

(1)Service more frequently when used in DUSTY areas.

(2)These items should be serviced by your service dealer, unless you have the proper tools and are mechanically proficient. Refer to the HONDA Shop Manual for service procedures.

(3)For commercial use, log hours of operation to determine proper maintenance intervals.

PAGE 20 — MVC80VH/VHW PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #3 (1/13/11)