Stowing the Handle:
1.Push up the handle (Figure 15).
2.Pull the stopper grip upward into the hole of the guard frame to lock the handle.
Figure 15. Stowing the Handle
MVH-200DA2 — OPERATION
Lifting:
1.Use a crane or lift to load and unload the machine. A skilled crane operator is required to perform the job.
2.When lifting the machine, check for any damaged or loose bolts, lifting hooks, and shock mounts.
3.Check any damaged or loose bolts in the guard frame to avoid machine sliding off.
4.Make sure that the machine is shut off before machine is lifted.
5.Use reliable cable for lifting.
6.Always lift the machine vertically and keep the machine away from workers and animals.
7.Do not lift the machine higher than the required height.
Transporting:
1.Always make sure that the machine is shut off while being transported.
2.Check that the fuel cap is properly closed and tightened.
3.When traveling long distances or on rugged terrain, drain the fuel of the machine before transporting.
4.Tie down the machine securely on the transportation so that it will not move or topple over.
