Multiquip manual MVH-200DA2 Plate Compactortroubleshooting, Plate Compactor Troubleshooting

MVH-200DA2 — PLATE COMPACTORTROUBLESHOOTING

Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take remedial action following the diagnosis based on the Compactor Troubleshooting Table (Table 9) information shown below. If the problem cannot be remedied, please leave the unit as it is and consult Multiquip’s business office or service plant.

TABLE 9. PLATE COMPACTOR TROUBLESHOOTING

SYMPTOM	POSSIBLE CAUSE	SOLUTION
	Engine speed too low?	Set engine speed to correct RPM.
	Clutch slips?	Check or replace clutch.
Travel speed too low, and vibration is
	V-belt slips?	Adjust or replace V-belt.
weak.
	Excessive oil in vibrator?	Drain excess oil and fill to proper level.
	Malfunction in vibrator housing?	Check eccentric, gears and counter
		weights.
	Directional components defective?	Check all directional components
	Reversing lever adjustment?	Adjust or repair reversing lever.
	Hydraulic oil hose broken?	Repair or replace hydraulic oil hose.
Travels forward or reverse, but
	Aeration in hydraulic oil for reversing system?	Bleed hydraulic oil system.
impossible to switch direction.
	Check valve in hand pump clogged with dust?	Clean or replace hand pump check
		valve.
	Piston or bearing in cylinder (vibrator assy.) is	If worn, replace cylinder piston or
	defective?	bearing.
	V-belt slips?	Replace V-belt.
	Clutch slips?	Check clutch springs and shoes.
Does not travel either forward or
		Check vibrator housing (eccentric,
reverse.	Vibrator locked?
		gears and counterweights)
	Piston or bearing in cylinder defective?	If worn, replace cylinder piston or
		bearing.
	Air in hydraulic line?	Bleed hrdraulic oil system.
Travel lever operating resistance great.
	Piston or bearing in cylinder defective?	If worn, replace cylinder piston or
		bearing.

PAGE 26 — MVH-200DA2 PLATE COMPACTOR — OPERATION & PARTS MANUAL — REV. #0 (01/27/06)