Multiquip MVH-304GHB- OPERATION, Starter Grip, Traveling, Throttle Lever Fast, Travel Lever

Models: MVH-304GHB

1 82
Download 82 pages 50.24 Kb
Page 18
Image 18
Figure 14. Starter Grip

5.Place the engine ON/OFF switch (Figure 13) in the "ON " position.

Figure 13. Engine ON/OFF Switch (ON Position)

6.Grasp the starter grip (Figure 14) and slowly pull it out.The resistance becomes the hardest at a certain position, corre- spondingtothecompressionpoint.Pullthestartergripbriskly and smoothly for starting.

Figure 14. Starter Grip

7.If the engine has started, slowly return the choke lever (Figure 15 ) to the CLOSED position. If the engine has not started repeat steps 1 through 6.

MVH-304GHB — OPERATION

TRAVELING

CAUTION :

Make sure to follow all safety rules referenced in thesafetysectionofthismanualbeforeoperating compactor. Keep work area clear of debris and other objects that could cause damage to the compactor or bodily injury.

1.Grasp the compactor's hand grip (Figure 16), and move the throttle lever (Figure 16) quickly to the fast position.

2.With the throttle lever in the fast position, the engine speed should be around 2,300 RPM, therefore engaging the cen- trifugal clutch

Figure 16. Throttle Lever ((Fast)

ALWAYS move the throttle lever

NOTEquickly without hesitation, because increasing the engine speed slowly causes the clutch to slip.

3. To make the compactor move in the forward direction push the travel lever ( Figure 17) forward

Figure 15. Choke Lever (Closed)

8.Beforethecompactoris placedintooperation,runtheengine for several minutes. Check for fuel leaks, and noises that would be associated with a loose component.

Figure 17. Travel Lever

PAGE 18 — MQ-MIKASA MVH-304GHB PLATE COMPACTOR — PARTS & OPERATION MANUAL — REV. #0 (11/25/02)

Page 18
Image 18
Multiquip MVH-304GHB- OPERATION, Starter Grip, Traveling, Throttle Lever Fast, Choke Lever Closed, Travel Lever