Safety Information

TRanspORTing saFeTY

CauTiOn

„NEVER allow any person or animal to stand underneath the equipment while lifting.

NOTICE

„Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing.

„Always make sure crane or lifi tng device has been properly secured to the lifting bail (hook) of the equipment.

„ALWAYS shutdown engine before transporting.

„neveR lift the equipment while the engine is running.

„Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

„Use adequate lifting cable (wire or rope) of suffi cient strength.

„Use one point suspension hook and lift straight upwards.

„dO nOT lift machine to unnecessary heights.

„ALWAYS tie down equipment during transport by securing the equipment with rope.

enviROnmenTaL saFeTY/deCOmmissiOning

NOTICE

Decommissioning is a controlled process used to safely

retire a piece of equipment that is no longer serviceable. If the equipment poses an unacceptable and unrepairable safety risk due to wear or damage or is no longer cost effective to maintain (beyond life-cycle reliability) and is to be decommissioned (demolition and dismantlement),be sure to follow rules below:

„dO nOT pour waste or oil directly onto the ground, down a drain or into any water source.

„Contact your country's Department of Public Works or recycling agency in your area and arrange for proper disposal of any electrical components, waste or oil associated with this equipment.

„When the life cycle of this equipment is over, remove battery and bring to appropriate facility for lead reclamation. Use safety precautions when handling batteries that contain sulfuric acid.

„When the life cycle of this equipment is over, it is recommended that the trowel frame and all other metal parts be sent to a recycling center.

Metal recycling involves the collection of metal from discarded products and its transformation into raw materials to use in manufacturing a new product.

Recyclers and manufacturers alike promote the process of recycling metal. Using a metal recycling center promotes energy cost savings.

emissiOns inFORmaTiOn

NOTICE

The diesel engine used in this equipment has been designed to reduce harmful levels of carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides (NOx) contained in diesel exhaust emissions.

This engine has been certifi ed to meet US EPA Evaporative emissions requirements in the installed confi guration.

Attempting to modify or make adjustments to the engine emission system by unauthorized personnel without proper training could damage the equipment or create an unsafe condition.

Additionally, modifying the fuel system may adversely affect evaporative emissions, resulting in fi nes or other penalties.

emission Control Label

The emission control label is an integral part of the emission

system and is strictly controlled by regulations.

The label must remain with the engine for its entire life.

If a replacement emission label is needed, please contact your authorized Kohler Engine Distributor.

page 10 — mvh406dsz/dsCPAs pLATE COMPACTOR • operation and parts manual — rev. #7 (02/28/14)

Page 10
Image 10
Multiquip MVH406DSZ, MVH406DSCPAS manual TRanspORTing saFeTY, EnviROnmenTaL saFeTY/deCOmmissiOning, EmissiOns inFORmaTiOn

MVH406DSCPAS, MVH406DSZ specifications

The Multiquip MVH406DSZ and MVH406DSCPAS are powerful and robust vibratory plate compactors designed for various construction and civil engineering applications. These machines are engineered to provide exceptional performance, durability, and ease of use, making them suitable for both professional contractors and DIY enthusiasts.

The MVH406DSZ model features a reliable air-cooled, four-stroke gasoline engine, delivering optimal power and efficiency. With a weight of approximately 400 pounds, it offers excellent stability while compacting soil and asphalt materials. The machine operates at a frequency of around 5,600 vibrations per minute (VPM), ensuring rapid and effective compaction across various surfaces. The heavy-duty base plate measures 24 inches in width, providing optimal coverage for large areas and enhancing productivity on the job site.

One of the standout features of the MVH406DSZ is its innovative anti-vibration technology, designed to minimize operator fatigue during extended use. This feature allows for a more comfortable operating experience, as the vibration levels are significantly reduced, enabling operators to work longer without discomfort. Moreover, the ergonomic handle is adjustable and designed for ease of maneuverability, ensuring that operators can guide the compactor effortlessly around obstacles.

On the other hand, the MVH406DSCPAS model features similar core specifications but comes equipped with additional benefits, such as the compactor’s ability to use multiple attachments for various tasks. This versatility is a key characteristic that makes the MVH406DSCPAS model particularly advantageous for contractors looking to maximize their equipment's utility on diverse jobs.

Both models are designed with durability in mind, featuring high-quality materials that can withstand the rigors of frequent use. The plates are constructed from heavy-duty steel, ensuring longevity and resistance to wear and tear. Additionally, the compactors’ easy-access maintenance points facilitate quick oil changes and routine upkeep, prolonging the equipment's life and ensuring reliable performance.

In conclusion, the Multiquip MVH406DSZ and MVH406DSCPAS compactors are exceptional choices for anyone in need of reliable and efficient compaction equipment. With their powerful engines, advanced vibration-reducing technology, and rugged design, these models are well-suited for effective operation in both small and large-scale projects. Whether you require a machine for grading, trenching, or asphalt work, the MVH406 series delivers performance and durability that you can count on.