operation
Mixing
1. On the hydraulic valve, push lever inward (Figure 23) for clockwise mixing rotation of blades.
NEUTRAL
PUSH IN
TO MIX
PULL OUT
TO REVERSE
Figure 23. Hydraulic Paddle Lever
2.The paddle shaft inside the drum should be rotating at this time.
3.Add a small amount water to the mixing drum.
4.Lift the mixing bag compound onto the steel safety grate over the bag cutter and let the contents fall into the drum. Add more water if desired and mix compound to desired consistency.
DUMPING
1.Push hydraulic dump lever (Figure 24) outward to place drum in dump position (Figure 25).
PUSH
TO DUMP
PULL
TO RETURN
Figure 24. Hydraulic Dump Lever
Figure 25. Hydraulic Dump
2.Pull hydraulic dump lever inward to place drum back in upright position.
WARNING
When rotating the mixing drum from the dump position to the upright position, keep hands clear of safety grate. The possibility exists of hands or fingers being crushed.
page 22 — Pro12 hydraulic mixer • operation manual — rev. #0 (05/06/13)
