Multiquip manual QP3TE Initial START-UP Engine, Starting the Engine Robin engine

QP3TE — INITIAL START-UP (ENGINE)

CAUTION

DO NOT attempt to operate the pump until the Safety, General Information, and Inspection sections of this manual have been read and thoroughly understood.

This section is intended to assist the operator with the initial start-upof the trash pump. It is extremely important that this section be read carefully before attempting to use the pump in the field.

Starting the Engine (ROBIN engine)

1.Place the engine fuel valve lever (Figure 7) to the "ON" position.

Figure 7. Engine Fuel Valve Lever (ON Position)

2.Move the throttle lever (Figure 8) away from the slow position, about 1/3 of the way toward the fast position.

3.Place the chokelever(Figure 9) in the "CLOSED " position if starting a cold engine.

Figure 9. Engine Choke Lever (Closed)

4.Place the choke lever (Figure 10) in the "OPEN" position if starting a warm engine or the temperature is warm.

Figure 10. Engine Choke Lever (Open)

5.Place the engine ON/OFF switch (Figure 11) in the "ON " position.

Figure 8. Throttle Lever (1/3 Start Position)

Figure 11. Engine ON/OFF Switch (ON Position)

PAGE 18 — QP3TE TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #4 (11/15/10)