Multiquip ST2037, ST2038P, ST204B, ST2047, ST204OT manual Emergencies, Maintenance Safety

ST2037, 47, 47B, 38P, 40T SUB. PUMP — RULES FOR SAFE OPERATION

local codes before operating pump. Severe injury or death	. Emergencies
by electrocution can result from operating an ungrounded
	■ ALWAYS know the location of the nearest fire extinguisher.
pump.

WARNING- Risk of Electric Shock

This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.

■NEVER use this pump to remove water from a swimming pool when people are in the water.

■ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using submersible pump.

■ALWAYS check pump oil level only when pump is cool. Expansion due to heat may cause hot! oil to spray from the oil plug when the oil plug is removed.

■DO NOT attempt to thaw-out a frozen pump by using a torch or other source of flame. Application of heat in this manner may heat the oil in the seal cavity above the critical point, causing pump damage.

■DO NOT pump water greater than 104 degrees Fahrenheit. Also DO NOT pump liquids containing acid or alkali.

■ALWAYS check strainer before pumping. Make sure strainer is not clogged. Remove any large objects, dirt or debris from the strainer to prevent clogging.

■ALWAYS use a large basket strainer when pumping water that contain large debris.

■ALWAYS flush pump after use when pumping water concentrated with heavy debris. Flush with clean fresh water. It is very important to always flush the pump before turning it off to prevent clogging.

■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

■ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment.

Maintenance Safety

■NEVER lubricate components or attempt service on a running machine.

■ALWAYS allow the machine a proper amount of time to cool before servicing.

■Keep the machinery in proper running condition.

■Fix damage to the machine immediately and always replace broken parts.

■ALWAYS know the location of the nearest and first aid kit.

■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

ST2037,47, 47B, 38P, 40T SUB. PUMPS — OPERATION AND PARTS MANUAL — REV. #3 (06/15/10) — PAGE 7