Murray 22" Self-Propelled Preparation, Models With Optional Grass Bag, How To Mount The Grass Bag

PREPARATION

MODELS WITH OPTIONAL GRASS BAG

HOW TO MOUNT THE GRASS BAG

IMPORTANT: Make sure the hooks, on each side of the frame assembly, are mounted on the pivot rod.

1.To mount the grass bag on the mower, raise the rear door. Hold the handle of the grass bag. Put the grass bag in the operating position (Figure 10). Lower the rear door.

WARNING: Do not use the grass bag unless the cover is in the op- erating postion.

Handle

Rear Door

Mount Frame

Hooks To Pivot Rod

Handle Bracket

Figure 10

HOW TO EMPTY THE GRASS BAG

WARNING: Before you remove the grass bag, stop the engine. Before you remove any grass from the mower housing, disconnect the wire from the spark plug.

1.Hold the rear door. Raise the rear door to a vertical position (Figure 10).

2.Lift the frame assembly over the two handle notches.

3.Open the top cover (Figure 11). Empty the grass from the grass bag.

4.To mount the grass bag on the mower, see

“How To Mount The Grass Bag”.	14
F-040411L

Grass Bag

Top Cover

Figure 11