ASSEMBLY
HOW TO INSTALL THE MOWER HOUSING
Use the fasteners shown below to install the mower housing. The fasteners are shown at full size.
4. | For shipping purposes, the back of the front hanger is secured |
| with a plastic tie. Cut the plastic tie. |
5. | Attach the front hanger to the mower housing with the hanger |
| rod. Fasten with the fasteners as shown. See illustration “F”. |
6. | Put the mower drive belt around the stack pulley. See Illustra- |
| tion “G” Figure 5. Make sure the “V” side of the mower drive |
| belt is against the stack pulley. Also, make sure the mower |
(A)
31x4
1.Move the blade rotation con- trol to the DISENGAGE posi- tion (Figure 5).
2.Move the lift lever to the level adjustment position (Figure 4).
WARNING: The lift lever is spring loaded. Make sure the lift lever is locked in the LEVEL ADJUST- MENT position.
3.Push the mower housing under the right side of the unit.
(B) |
|
17x91 |
|
Level Adjustment |
|
Position | Figure 4 |
| drive belt is not twisted. |
7. | Make sure the mower drive belt is between the stack pulley |
| and the two belt guides. See illustration “G”. |
8. | Attach the lift links to the lifter assembly. Fasten with the |
| washers (B) and hair pins (A). See illustrations “A” and “B”. |
9. | Attach the right and the left suspension arms to the suspen- |
| sion brackets. Fasten with the washers (B) and hair pins (A). |
| See illustrations “C” and “D”. |
10. | Attach the extension spring to the blade control rod. Make |
| sure to attach in the top hole. See illustration “E”. |
11. | Move the blade rotation control to the ENGAGE position. |
| Make sure the mower drive belt is inside all the belt guides. |
12. Make sure the mower housing is level. See the instructions on | |
| “How To Level The Mower Housing”. |
13. | Check the operation of the blade rotation control. See the in- |
| structions on “How To Adjust The Blade Rotation Control”. |
A |
| Lift Lever |
|
|
|
| Stack Pulley |
| |
|
|
|
| |
| Lift Link | Lifter |
|
|
|
| Assembly |
|
|
B | Blade Rotation |
| Belt | Belt |
| Control |
| ||
|
| Guide | ||
|
|
| Guide | |
|
|
|
| |
|
|
| Mower Drive Belt | |
|
|
|
| Suspension |
| A |
|
| Arm |
|
|
|
| A |
B |
|
|
|
|
|
|
|
| B |
| Lift Link |
| Extension |
|
|
| Spring | Blade | |
|
|
| Control Rod | |
Suspension Arm |
|
|
|
|
A |
|
| Mower |
|
B |
|
| Drive Belt |
|
|
|
|
| |
|
| Hanger Rod | Front Hanger | Figure 5 |
| 12 |
|
| |
