MAINTENANCE

MAINTENANCE CHART

FREQUENCY

MAINTENANCE REQUIRED

COMMENTS

 

 

 

Daily or before each

Maintenance engine.

Refer to the Engine Owner’s Manual.

use

 

 

 

 

 

 

Examine blade(s).

Check for cracks, wear, and excessive

 

 

damage.

 

 

 

 

Remove debris from unit and mowing area.

 

 

 

 

 

Examine all rotating and sliding parts.

 

 

 

 

 

Check tire inflation.

Refer to the Maintenance section.

 

 

 

 

Verify that the mower housing is level.

Refer to the Maintenance section.

 

 

 

 

Examine V–belts.

Check for cracks, wear, and excessive

 

 

damage.

 

 

 

 

Check brake operation.

Refer to the Operation and Maintenance

 

 

sections.

 

 

 

After completion of

Change oil.

Refer to the Engine Owner’s Manual.

first 5 hours

 

 

 

 

 

After 25 hours

Maintenance engine.

Refer to the Engine Owner’s Manual.

 

 

 

 

Remove, examine, sharpen, and balance

Refer to Maintenance section.

 

blade(s).

 

 

 

 

 

Check adjustments:

Refer to Maintenance section.

 

a. Blade Rotation Control

 

 

b. Brake

 

 

c. Clutch

 

 

d. Steering

 

 

 

 

 

Lubricate chassis and mower housing.

Refer to Where to Lubricate instructions.

 

 

 

 

Check the muffler:

Refer to Maintenance section.

 

a. Torque

 

 

b. For wear or burn out

 

 

c. Condition of spark arrestor, (if applicable).

 

 

 

 

Before storage of 30

Prepare engine for storage.

Refer to the Engine Owner’s Manual.

days or more

 

 

 

 

 

 

Drain fuel system.

Refer to warnings in the Owner’s Manual.

 

 

 

 

Add fuel stabilizer.

Refer to the Engine Owner’s Manual.

 

 

 

 

Prepare battery for storage:

 

 

a. Remove from unit.

 

 

b. Fully charge.

 

 

c. Move to cool dry place.

 

GENERAL RECOMMENDATIONS

1.The owner’s responsibility is to maintain this product. This will extend the life of the product and is also necessary to maintain warranty coverage.

2.Check the spark plug, drive brake, lubricate the unit, and clean the air filter once a year.

3.Check the fasteners. Make sure all fasteners are tight.

4.Follow the Maintenance section to keep the unit in good operat- ing condition.

WARNING: Before you make an inspection, adjust- ment, or repair to the unit, disconnect the wire to the spark plug. Remove the wire from the spark plug to prevent the engine from starting by accident.

NOTE: Torque is measured in foot pounds (metric Nm). This measurement describes how tight a nut or bolt must be. The torque is measured with a torque wrench.

HOW TO

CHECK THE MUFFLER

Check the muffler every 50 hours. Make sure the muffler is correctly mounted and is not loose. If the muffler is worn or burnt, replace with a new muffler. A worn muffler is a fire hazard and can also damage the engine.

If you mount a spark arrester to the muffler, also check the spark arrester when you check the muffler. If the spark arrester is worn or damaged, replace it with a new spark arrester. See your nearest authorized service center for a spark arrester.

F–030758L

22

Page 21 Page 23
Page 22
Image 22
Murray 465609x24A manual Frequency Maintenance Required Comments, General Recommendations, HOW to Check the Muffler
Page 21 Page 23

465609x24A specifications

Murray 465609x24A is a versatile and robust equipment designed for a variety of applications, particularly in the fields of agriculture and industrial use. Engineered for durability and efficiency, this model is built to withstand rigorous conditions while providing high performance.

One of the standout features of the Murray 465609x24A is its powerful engine. It is equipped with a state-of-the-art propulsion system that ensures maximum output with minimal fuel consumption. The engine's advanced technology allows for smooth operation, whether it's powering through tough terrains or handling heavy loads. This makes it ideal for users who demand reliability in challenging environments.

In addition to its powerful engine, the 465609x24A incorporates advanced safety features which are paramount for both operator protection and equipment longevity. An integrated sensor system continuously monitors the machine’s performance, automatically adjusting parameters to prevent overheating and maintain optimal working conditions. This technology not only enhances safety but also extends the lifespan of the equipment.

The design of the Murray 465609x24A is fundamentally user-centric. It features an ergonomic layout that allows for ease of operation. The controls are intuitively placed, enabling operators to manage tasks efficiently without unnecessary complication. The spacious cabin allows for extended use without compromising comfort, which is essential during long workdays.

Furthermore, the 465609x24A includes a versatile attachment system, accommodating a wide range of tools and implements. This adaptability enhances its functionality, allowing users to tailor the machine according to specific tasks—whether it’s plowing, lifting, or transporting materials.

Maintenance is simplified with the Murray 465609x24A. The design includes easy access points for routine checks, making it straightforward for operators to conduct maintenance tasks. This emphasis on serviceability ensures that the machine remains in peak operational condition, reducing downtime and increasing productivity.

In conclusion, the Murray 465609x24A stands out as a reliable, efficient, and adaptable piece of machinery. With its powerful engine, robust safety features, user-friendly design, and easy maintenance, it is a formidable choice for those in need of a dependable workhorse in demanding environments. The combination of these characteristics makes the Murray 465609x24A a leading choice in its category, appealing to both professional and industrial users alike.
Top Page Image Contents