Murray 615000x30NA owner manual Operation, Snow Thrower Operating Controls

OPERATION

Know your snow blower and its controls. Be sure you (or any other operator) have read and understood the Operation Precautions listed on page 3 of this manual. This Snowthrower conforms to applicable North American safety standards.

Key Lock/Key

Control Bar

Power Cord

Connector

Strain Relief

Discharge

Control Rod

Upper Handle	Lower Handle
Tube	Grip

Bottom Handle

Tube Directional Discharge

Chute

Motor Housing

2 Blade Aluminum Impeller

Impeller Blades Figure 6

The Operation of any Snowthrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your Snowthrower and while operating. We recommend Wide Vision Safety Mask for over the spectacles or standard safety glasses, available at your authorized service dealer.

SNOW THROWER OPERATING CONTROLS

KEYLOCK – Key must be inserted and rotated for operation. Remove key when not in use.

CONTROL BAR – Squeeze control bar for operation, release control bar to stop operation.

STRAIN RELIEF – To attach extension cord so cord will not stress power cord connector.

DISCHARGE CONTROL ROD – Pull and rotate to direct snow discharge, release and the control rod will lock into position.

IMPELLER BLADES – When operating Snowthrower impeller blades spin to discharge snow. Replace blades when worn or damaged.

F-031061C 6