OPERATION
EYE PROTECTION
Always wear safety glasses. If you wear eye glasses, put a Wide Vision Safety Mask over your eye glasses.
WARNING: Debris thrown from the Edger can result in foreign objects being thrown into the
eyes, which can cause severe eye dam- age. Always wear safety glasses or eye shields when operating the Edger.
HOW TO USE THE INDEX LEVER
Bevel edging cuts a trench and reduces the need to edge as often.
1.Stop the engine and disconnect the spark plug wire from the spark plug.
2.Disengage the index lever from the EDGING position and move to the BEVEL position.
3.Reconnect the spark plug wire to the spark plug.
4.Start the engine.
5.Move the depth control lever to the de- sired height.
NOTE: For deep edging, first cut at shal- low depths. Then, cut at greater depths until the desired depth is obtained.
WARNING: While the engine is running, never leave the Edger. Before you adjust the wheels or
change the blade position, always dis- engage the cutting blade and stop the engine.
Index Lever
Figure 7
10 |
