SERVICE AND ADJUSTMENT

HOW TO REMOVE THE BELT

The belt made of a special compound. If the belt becomes worn or breaks, replace the belt with an original equipment belt.

1.Disconnect the spark plug wire from the spark plug.

2.Drain the gasoline and oil from the en- gine.

3.Tip the Edger backwards on the handle. Block the top of the handle against a wall or under a bench.

4.Remove the screws from the belt guard (see Figure 11).

Belt

Screw

Screw

Belt Guard

Figure 11

5.To compress the spring and release ten- sion on the belt, push the blade bearing housing back toward the engine (see Figure 12).

6.Carefully note the twist of the belt around the engine pulley. Remove the old belt. Replace with an original equipment belt.

7.To install a new belt, reverse the above steps. Make sure to twist the new belt as shown in Figure 12.

NOTE: If the belt is not installed properly, the blade will not turn in the proper direc- tion and can damage the blade or belt.

Engine Pulley Blade Housing Bearing Spring

Note Direction

Of Twist

Figure 12

F–041104L

15

Page 14 Page 16
Page 15
Image 15
Murray EV3850x4B 3.8 operating instructions Service and Adjustment, HOW to Remove the Belt
Page 14 Page 16

EV3850x4B 3.8 specifications

The Murray EV3850x4B 3.8 is an innovative and versatile electric vehicle (EV) designed to meet the growing demand for sustainable transportation solutions. With a sleek design and cutting-edge technology, the EV3850x4B 3.8 stands out in the electric vehicle market, appealing to environmentally conscious consumers and tech enthusiasts alike.

One of the EV3850x4B 3.8's main features is its powerful electric drivetrain, which offers impressive performance while minimizing emissions. The vehicle is equipped with a high-capacity lithium-ion battery that provides an extended range on a single charge. This allows drivers to travel up to 300 miles without the need for frequent recharging, making it suitable for both daily commuting and long-distance travel.

The EV3850x4B 3.8 comes with advanced regenerative braking technology, which recovers energy during braking and helps to extend the overall driving range. This feature significantly enhances the vehicle's efficiency, making it a smart choice for eco-conscious drivers. Additionally, the vehicle's low center of gravity contributes to improved handling and stability, ensuring a smooth and enjoyable driving experience.

Another remarkable technology in the EV3850x4B 3.8 is its advanced infotainment system, which integrates seamlessly with various smartphone applications. This system provides drivers with real-time information on battery status, charging stations, and navigation, all displayed on a user-friendly touchscreen interface. Voice recognition features further enhance the driving experience by allowing drivers to control various functions without taking their hands off the wheel.

In terms of safety, the EV3850x4B 3.8 is equipped with a comprehensive suite of driver-assistance technologies. This includes adaptive cruise control, lane-keeping assist, and automatic emergency braking, all designed to enhance driver safety and confidence on the road. These features work together to reduce the likelihood of accidents, making the EV3850x4B 3.8 a reliable choice for families.

The exterior design of the EV3850x4B 3.8 is both stylish and aerodynamic, contributing to improved energy efficiency. LED headlights and taillights not only enhance visibility but also add a modern touch to the overall aesthetic. Inside, the cabin boasts a spacious layout with high-quality materials and seating for five passengers, ensuring comfort for everyone on board.

In conclusion, the Murray EV3850x4B 3.8 is a formidable contender in the electric vehicle market, combining high performance, advanced technology, and an eco-friendly design. Its impressive range, safety features, and modern conveniences make it an excellent choice for those looking to transition to electric driving while enjoying a dynamic and comfortable ride.
Top Page Image Contents