ASSEMBLY
HOW TO PREPARE THE ENGINE
ENGINE DOES NOT CONTAIN
OIL OR GASOLINE
See the engine manufacturer’s instructions for the type of gasoline and oil to use. Before you use the unit, read the information on safety, operation, maintenance, and storage. This Edger was shipped with a 20 ounce container of SAE30 motor oil. Add this oil to the engine before operating. To fill the crank- case, remove the oil fill cap/dipstick and add the SAE30 motor oil. DO NOT OVERFILL.
NOTE: The engine may contain a small amount of oil. When adding oil, frequently insert the oil fill cap/dipstick and check the amount of oil in the engine. DO NOT OVERFILL.
WARNING: Follow the engine manufacturer’s instructions for the type of gasoline and oil to
use. Always use a safety gasoline con- tainer. Do not smoke when adding gaso- line to the engine. When inside an en- closure, do not fill with gasoline. Before you add gasoline, stop the engine. Let the engine cool for several minutes.
IMPORTANT: This unit is equipped with an internal combustion engine and must not be used on or near any unimproved forest– covered,
In the State of California the above is re- quired by law (Section 4442 of the Califor- nia Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. See an Authorized Ser- vice Center for a spark arrester for the muf- fler.
nCHECKLIST
For the best performance and satisfaction from this quality product, please review the following checklist before you operate the Edger:
nAll assembly instructions have been completed.
nCheck carton. Make sure no loose parts remain in the carton.
nAll fasteners have been properly tight- ened.
As you learn how to use the Edger, pay extra attention to the following important items:
nnEngine oil is at proper level.
nnFuel tank is filled with a fresh, clean, regular Unleaded gasoline.
nnBecome familiar and understand the function of all controls. Before your start the engine, operate all controls.
8 |