Other functions (VCR)
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.
VCR DVD INPUT SELECT
STOP
SP/SLP
REC/OTR
Duplicating a video tape
Preparation:
•Turn ON the TV and select the corresponding video input.
•Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)
•Load a cassette tape with the erase prevention tab intact.
•Load a previously recorded tape into the playback VCR or Camcorder.
1 Press SP/SLP to select the desired tape speed SP or SLP.
It is recommended to set the
tape speed to the SP mode on the recording VCR for best results.
2 Press INPUT SELECT once or twice to select AUDIO/VIDEO input position.
“L1” or “L2” will appear in the display.
L1: on the rear panel
L2: on the front panel
Connection with second VCR
Playback VCR
To VIDEO OUT 
To AUDIO (R) OUT To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Recording VCR
To VIDEO IN | To AUDIO (R) IN |
| To AUDIO (L) IN |
Connection with Camcorder
3 Press PLAY on the playback VCR or Camcorder. |
| Playback Camcorder | |
| To AV Jack | ||
4 | Press REC/OTR on the recording VCR. |
| Recording VCR |
The duplicating process begins. |
|
| |
|
|
| To AUDIO (R) IN |
|
|
| To AUDIO (L) IN |
5 |
| To VIDEO IN | AUDIO/VIDEO cable (not supplied) |
Press STOP when you finish duplicating. | For duplicating a previously recorded tape from a | ||
| |||
| camcorder, follow the camcorder manufacturer’s | ||
instructions. A typical camcorder dubbing hookup is shown above.
40
40 | 1/12/06, 17:06 |
