Timer recording
Timer recording can be programmed
VCR DVD
EJECT
VCR MENU SET +/–
ENTER
CANCEL
TIMER REC
Timer recording
Preparation:
• Press VCR DVD selector to select the VCR mode.
• Load a cassette tape with the erase prevention tab intact.
• Check the time and date are correct 24 . Example: Program a timer recording for the 26th day, channel 125 (Cable TV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).
1 Press VCR MENU. Select “TIMERRECSET”, then press ENTER.
|
| |||
| Press SET + or – to select one of the program | |||
2 line, then press ENTER. |
|
|
| |
|
| 〈〉 | ||
3 | Press SET + or – to select the date, then press | |||
ENTER. | DATE | START | END CH | |
| ||||
| 26(SA) | |||
|
| — — — — — | ||
|
| — — — — — | ||
|
| — — — — — | ||
|
| — — — — — | ||
|
| — — — — — | ||
|
| — — — — — | ||
|
| — — — — — | ||
|
| |||
4 Set the start time, end time, channel and tape speed as in step 3.
DATE START END CH
26(SA) 11:00PM 11:30PM125 SLP
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
Notes:
•Press CANCEL to move cursor backward for correction.
•To record from external source set the channel to “L1” or “L2”.
5 To enter other programs, repeat step 2 through 4.
• To return to the normal screen, press VCR MENU twice.
DATE START END CH
26(SA) 11:00PM 11:30PM125 SLP
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
— — — — —
6 Press TIMER REC. The timer symbol (
) will appear on the display and the VCR standby for recording.
At the same time, VCR mode will change to DVD mode automatically. You can use DVD even if the VCR is in the timer recording mode. If you do not use the DVD, turn the power off.
Notes:
•The timer recording will start at 5 seconds before the preset starting time.
•If the timer symbol ( 
) does not appear on the display when TIMER REC is pressed, the cassette is not inserted
29.
•If the cassette is ejected when TIMER REC is pressed, the erase prevention tab of the cassette may have been removed 29 .
Notes:
•If the timer symbol (
) blinks when the timer recording ended, the TV program has not been completely recorded because of an insufficient tape length. Press TIMER REC to cancel the timer program or press EJECT to remove the cassette tape.
•During timer recording standby mode, the VCR mode cannot be operated. To use the VCR, first press TIMER REC, then press VCR DVD selector to change to VCR mode. After VCR mode is selected, press TIMER REC again to put the VCR into timer recording standby mode.
•If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC again within the programmed time, the recording operation will start again.
•After a power failure or disconnection of the power plug, all programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock 24 and reprogram any timer recording.
Recording (VCR)
37
37 | 1/12/06, 17:05 |
