Toshiba SD-V394SU Stereo recording and playback Second Audio Program SAP, Other functions VCR

Other functions (VCR)

Stereo recording and playback / Second Audio Program (SAP)

VCR MENU

ENTER

SET +/–

AUDIO SELECT

Stereo recording and playback Second Audio Program (SAP)

The VHS Hi-Fi audio system permits high fidelity record- ing of MTS STEREO TV broadcasts.

When a MTS STEREO broad- cast is received, “STEREO” will appear on the screen for about 4 STEREO seconds and the program can

be viewed or recorded in stereo. The Hi-Fi stereo recording pro- cedure is the same as for normal recordings.

Note:

When using a Cable TV system, stereo TV programs may be transmitted over a mono cable channel. In this case “STEREO” will not appear and the sound will be in mono.

Output selection

When viewing an MTS stereo TV program, or playing a prerecorded VHS Hi-Fi stereo videotape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi stereo position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The “R” and “L” positions allow the audio from the Right or Left Hi- Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.

OUTPUT	SOUND HEARD ON BOTH
SELECTION	SPEAKERS
STEREO	STEREO
L ch	LEFT CHANNEL AUDIO
R ch	RIGHT CHANNEL AUDIO
MONO	MONO

Your DVD/VCR is fitted with a SAP broadcast system which
enables you to switch to a second audio program when view-
ing a selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿
	Press VCR MENU. Then press SET + or – to
1 select “SAP”.
		￿￿￿￿￿￿￿￿￿￿￿￿￿￿		Other
2	Press ENTER to select “ON”.		￿￿￿￿￿	functions
		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	Then press VCR MENU until the
	menu screen is cleared.			(VCR)
		￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Listening to SAP

When the VCR is turned on or a channel selection is made, make certain the letters “SAP” appears on the screen for about 4 seconds. This means that the “Second Audio￿￿￿￿￿￿￿￿￿Program” broadcasting is available￿￿￿ .

OR

Notes:

•When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.

•When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cable not connected), the sound will be monaural.

39

2I30101B-En_p38-41 39 1/12/06, 17:05