Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode.

VCR DVD VCR MENU

ENTER

SET +/–

TV/CABLE selection

Preparation:

Turn ON the TV and select to the corresponding video input.

Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)

1 Press VCR MENU. Press SET + or – to select “CH SETUP”, then press ENTER￿￿￿￿.￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2 Press SET + or – to select “TV/CABLE”￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Press ENTER to select the TV or CABLE

3 mode.

￿￿￿￿￿￿￿￿￿￿

 

The arrow indicates￿￿the￿￿￿￿selected￿￿￿￿mode.

TV

- VHF/UHF channels

 

CABLE

- Cable TV channels

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

4 Press VCR MENU until the menu screen is cleared.

Note:

You can’t select “CH SETUP” if you set the channel to “L1” or “L2”.

2I30101B-En_p26-3127

Setting channels automatically

￿￿￿￿￿￿￿￿￿￿

￿￿￿￿

Basic

1 select “AUTO CH MEMORY”.￿￿￿￿￿￿

 

Repeat left step 1 and press SET + or – to

 

 

 

setup

 

 

(VCR)

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2 Press ENTER.

Auto tuning will begin. The channel dis- play will count up and when finished,￿￿￿￿￿

the screen returns to normal.

27

1/12/06, 17:05

Page 27
Image 27
Toshiba SD-V394SU owner manual Tuner setting, TV/CABLE selection, Setting channels automatically, Vcr