Toshiba SD-V394SU To ADD/DELETE channels, Noise elimination, To delete channels, Channel

Basic setup (VCR)

Tuner setting (Continued)

VCR MENU

ENTER

SET +/–

0–9

To ADD/DELETE channels

1 Repeat the step 1 on page 27 . Then￿￿￿￿￿￿￿￿press SET + or – to select the “ADD/DELETE” and￿￿￿￿press￿￿￿￿￿￿￿￿ENTER.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿

2 To Add or Delete channels

1) Press Direct channel selection buttons (0–9) or SET +/– to select a channel number you want to add or delete.

2) To add channels

Press ENTER until “ADD” appears on the screen.

To delete channels

Press ENTER until “DELETE” appears on the screen. The channel number will blink.

3) Repeat step 1 and 2 to add or delete￿￿￿ other ￿￿￿￿￿

channel.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Noise elimination

When you don't want to receive a weak signal broadcast, a Blue back screen can be obtained by selecting the NO NOISE BACK- GROUND to “ON”. When the unit is shipped from the factory, the NO NOISE BACKGROUND is set to “ON”.

1	￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	Repeat the steps 1~2 on page 26	and press SET
	+ or – to select “NO NOISE BACKGROUND”.

￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

2 Press ENTER to select “ON” or “OFF”￿￿￿￿￿￿￿￿￿￿position.￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿

〈￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿〉

3 Press VCR MENU until the menu screen is cleared.

3 Press VCR MENU until the menu screen is cleared.

28

2I30101B-En_p26-31 28 1/12/06, 17:05