| ASSEMBLY |
|
ASSEMBLY | 1 – Control Rod | |
Parts Packed Separately In Carton |
| |
1 | – Owner’s Manual (not shown) |
|
1 | – Container Of Oil |
|
2 | – Hair Pin |
|
1 | – Control Rod | 1 – Hair Pin |
|
|
1 – Container of Oil
WARNING: Always wear safety glasses or eye shields while as- sembling the Edger.
Figure 1 shows the Edger completely as- sembled.
References to the right or left side of the Edger are from the viewpoint of the opera- tor’s position behind the unit.
REMOVE THE EDGER FROM THE CARTON
1. Remove the bottle of oil and parts bag
from the carton.
2.Cut down all four corners of the carton.
3.Remove the packing material positioned around the front and rear of the unit. Leave the packing material on the bot- tom of the unit until the control rod is as- sembled. This will keep the front wheel in a stable position.
4.Lift the Edger out of the carton and place on a hard level surface.
Figure 1
6 |