OPERATION

PRE-START INSPECTION

1.Make sure all safety guards are in place and all nuts and bolts are secure.

2.Check oil level in engine crankcase. See your engine manual for procedure and specifications.

3.Inspect air cleaner for cleanliness. See your engine manual for procedure.

4.Check the fuel supply. Fill the fuel tank no closer than

1 inch from top of tank to provide space for expansion. See your engine manual for fuel recommendations.

5.Be sure spark plug is tightened securely and spark plug wire is attached.

6.Check depth regulator lever position.

Engine is shipped from factory without oil. You must add engine oil before starting engine.

START-UP

The controls required to start and run the rototiller are located on the engine and are marked "Choke" and "Throttle".

A more detailed description of engine operation and all related precautions and procedures can be found in the engine manufacturer's manual that accompanies each tiller.

CAUTION

Please do not start your tiller until you have read the Manual that came with your engine, and the sections in this manual titled Controls, Adjustments and Safety. If you have read these, follow the steps below to start your tiller. Always perform this pre- start checklist before starting the engine.

WARNING

Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is hot or running. Always move outdoors to fill the tank.

Cold Starts

1.Move choke lever to full choke position.

2.Move throttle lever to "start".

3.When starting, operator should place free hand where indicated and start the engine from the operator position.

4.Pull starting rope out slowly one time and allow to return normally.

5.Pull starting rope out rapidly, and allow rope to return normally.

6.When engine starts, gradually move choke lever to "no choke" position and increase throttle speed.

Restarting A Warm Engine

Restarting an engine that is already warm from previous running does not normally require use of the choke.

1.Move throttle lever to "start" position.

2.When starting, operator should place free hand where indicated and start the engine from the operator position.

3.Pull starting rope out rapidly until engine starts. Allow rope to return normally.

4.Adjust throttle speed to "high" for best tiller action.

Idle Speed

Use the "low" position on the throttle lever to reduce stress on the engine when tilling is not being performed. Lowering the engine speed to "idle" the engine will help extend the life of the motor, as well as conserve fuel and reduce the noise level of the equipment.

Operating Speed

For normal tilling, set the throttle lever to "fast".

F041303L

14

Page 13 Page 15
Page 14
Image 14
Murray FT6000X92A manual PRE-START Inspection, Start-Up
Page 13 Page 15

FT6000X92A specifications

The Murray FT6000X92A is a powerful and versatile outdoor utility vehicle designed to meet the demanding requirements of both residential and commercial applications. This exceptional machine is built to handle a wide range of tasks, making it an indispensable tool for landscapers, contractors, and homeowners alike.

One of its standout features is the state-of-the-art 6000-watt generator, which provides ample power for various equipment. This feature is particularly useful in scenarios where electricity supply is unreliable or non-existent, such as remote job sites or during power outages. The generator is equipped with multiple outlets, including 120V and 240V options, allowing for versatile connectivity to different tools and appliances.

The FT6000X92A is powered by a robust 200cc engine, engineered for durability and performance. This engine is designed with advanced technologies that enhance fuel efficiency and reduce emissions, making it an eco-friendly choice. The system is built with a reliable cooling mechanism to ensure optimal operation even in intensive working conditions.

In terms of mobility, the vehicle boasts an advanced suspension system that offers excellent stability and smooth ride quality over various terrains. This is complemented by its all-terrain tires, which provide superior traction, making it easy to navigate through mud, gravel, and uneven surfaces. The ergonomic design of the vehicle ensures comfort for operators during prolonged use and features an adjustable seat to accommodate different user preferences.

Safety is a critical aspect of the FT6000X92A, which includes features such as automatic shut-off mechanisms, roll-over protection, and a reinforced frame designed to safeguard the operator in case of unexpected events. Additionally, the unit is outfitted with LED headlights for improved visibility during low-light conditions, ensuring that tasks can continue into the evening hours without interruption.

The Murray FT6000X92A is more than just a utility vehicle; it's a reliable partner in any landscaping or construction project. Its combination of power, efficiency, and safety, along with user-centric features, make it a top choice for anyone in need of a dependable outdoor vehicle. Whether tackling tough jobs or simple household tasks, the FT6000X92A is built to exceed expectations and deliver professional-grade results.
Top Page Image Contents