Muse electronic Model Eleven manual Disc Play CD

A second press of the “Display” button on the remote will cause the front panel to display the remaining time of the entire disc. The video device (if allowed in setup) will also now display new information on the disc being played including the elapsed time in play, the total remaining time for the disc and the total playing time of the disc.

Disc Play – CD

To play a CD, first open the disc tray by pressing “open” on the front panel. Place the disc in the tray with the data side down (label up). Then either press “open” on the front panel or “Play/play” on either the remote or front panel to begin play. The table of contents of the CD will be read, and play will begin at the first track. You can stop play at anytime by either opening the tray by pressing “open” on the front panel or by pressing “Stop/stop” on either the remote or front panel.

CDs that have more than a single track can be navigated between available tracks by using the “Skip+/skip+” or “Skip-/skip-“ buttons on either the remote of front panel. Navigation within any track can be accomplished by using the “Search+” and “Search-“ controls on the remote. Disc play can be temporarily suspended by pressing “Pause/pause” on either the remote or front panel. Disc play can be resumed by pressing “Play/play” on either the remote or front panel.

With a CD playing in the Model Eleven, information as to the track number and time in track is displayed on the front panel. If the “Display” control on the remote is pressed, the display will change for time in track to time remaining in track. If allowed in the setup menu, the “Display” control will also display detailed information on the disc on video device. Information about the current and total number of tracks, elapsed time in the current track, time remaining in the current track and total disc playing time is displayed.

A third press of the “Display” button on the remote will cause the front panel display to return to its initial configuration and will extinguish the disc information on the video device.

Pressing the “Menu” button on the remote while playing a CD will cause the video device to display the “Disc Navigator”. This navigator consists of a columnar listing of the tracks numbers as well as the current track being played. A subsequent press of “Display” will cancel the OSD on the video device. During the period when an OSD item is present, the front panel of the Model Eleven will display GUI (Graphical User Interface).

Pressing the “Repeat” button on the remote will invoke a video display that allows for a number of different play modes to be selected. Each of the five submenus has a number of different options.

12