NetStreams Musica Power Amplifier
Configuration for Bridged (Mono) Operation
The MU290 Power Amplifier may also be operated as a powerful
Input Connections
The right and left audio signal will need to be summed together in order to have both channels play out of one speaker. This will need to be done by the installer. Pins 3 and 4 on the RJ45 connection will need to be linked together in order to get a mixed mono signal.
Pin Out | Description |
1 | IR Out + |
2 | IR Ground |
3 | Left Input Audio + |
4 | Right Input Audio + |
5 | Ground |
6 | Audio Logic |
7 | Left Output Audio + |
8 | Right Output Audio + |
Output Connections
Prepare the speaker leads as described on page 3. Insert the stripped leads onto screw terminals 2 and 4 ONLY (Channel 1 Positive (Becomes the Negative) and Channel 2 Positive). Make no connection to terminal 1 and 3. Inspect for possible shorts or broken wires.
Depress the
The amplifier is now ready for mono operation.
MU290 Input Controls
The input sensitivity of each amplifier channel is adjustable for optimum performance with any
All specifications subject to change without notification. All rights reserved. Copyright©2004 NetStreams
main.512.977.9393 / fax.512.977.9398 / 3600 W. Parmer Lane, Austin, TX 78727 / www.netstreams.com
6 |