NetStreams Musica Power Amplifier
Safety (continued)
5.The amplifier should only be connected to 120 VAC, 60 cycle grounded power supply. To avoid defeating the ground polarization of the power plug, do not remove the ground pin on the plug and check the outlet for correct polarization before plugging in the amplifier’s power cord.
6.Route power cord and other cables so that they are not likely to be walked on, tripped over, or stressed. Pay particular attention to condition of cords and cables at plugs, and the point where they exit from the amplifier. To prevent risk of fire or injury, damaged cords and cables should be replaced immediately.
7.Clean the amplifier with a damp cloth. Do not use solvents or abrasive cleaners. Never pour any liquid on or in the amplifier.
8.Damaged amplifiers requiring service. The amplifier should be serviced by qualified service personnel when:
the power supply cord or the plug has been damaged. objects have fallen or liquid has spilled into the unit. the amplifier has been exposed to rain or other moisture.
the amplifier does not appear to operate normally or exhibits a marked. the amplifier has been dropped, or the enclosure damaged.
9.The amplifier should be situated so that its location and position do not interfere with its proper ventilation. For example; the amplifier must not be placed on a rug, bed, sofa, or similar surface which impedes airflow across the chassis. Airflow through the ventilation openings should be unobstructed.
10.The user should not attempt to service the amplifier beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.
All specifications subject to change without notification. All rights reserved. Copyright©2004 NetStreams
main.512.977.9393 / fax.512.977.9398 / 3600 W. Parmer Lane, Austin, TX 78727 / www.netstreams.com
3 |
