Musical Fidelity M1 VINL manual General Advice, Installation, Precautions & User Information

GENERAL ADVICE

Installation, Precautions & User Information

This new M1 VINL is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions:

•Heed all warnings shown on the back of the product.

•The M1 ViNL has a built-in universal power supply that can be connected to mains of between 80 to 253V AC r.m.s. 50-60Hz without modification.

•Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

•Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items placed on them.

•Do not use near water, or place water-filled containers on the M1 VINL, for example, a flower vase or potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform the dealer, who should then check the unit before further use. Entry of liquid into the M1VINL is dangerous, and may cause electric shock or fire hazard.

•Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.

•Do not remove any covers or try to gain access to the inside. There are no user adjustments or fuses to

change without qualification. Refer all service work to an authorised Musical Fidelity agent.

*Note: Unauthorised opening of the equipment will invalidate any warranty claim.

•Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they may harm the surface finish.

The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by lightning. For protection of the audio system during electrical storms, remove the mains plugs.

If after-sales service is required, to help the dealer identify the M1 VINL please quote the serial number located on the rear panel of the unit.

M1 ViNL manual issue 2.doc2 Page 4 of 12