Installation Instructions.
Trimless Panel with Handle
Dimensions for trimless panel with handle
Use these dimension drawings to create a custom panel for use without a trim kit. The panel should be 1/2″ to 5/8″ (13 mm to 16 mm) thick.
NOTE: A thicker panel may need rounded front corners and
Installation:
1.Remove foot pedal, toe guard and decorative panel.
2.Align the top of the custom panel with the bottom of the handle.
3.Secure the panel from the back using four #8 x 1″ wood screws.
4.Reinstall the toe guard using the existing screws and 1/2″ washer. Then reinstall the foot pedal.
Consumer Support Troubleshooting Tips Installation Instructions Operating Instructions Safety Instructions
| 23 13⁄16″ | 1 |
|
|
|
| |
| (60.5 cm) |
|
|
|
| 2 | 3 |
|
|
| |
15″ |
|
|
|
(38.1 cm) |
| 3 |
|
1 | Handle |
|
|
2 | Custom Panel |
|
|
3 | #8 x 1″ Wood Screws |
|
|
4 | Toe Guard |
|
|
5 | Washer |
|
|
6 | Toe Guard Screw | 4 |
|
|
| 5 |
|
|
| 6 |
|
16
