Installation Instructions.
Before you start…
Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the personal responsibility and obligation of the customer to contact a qualified installer to assure that electrical installation meets national and all local codes and ordinances.
Grounded electrical outlet is required.Check the location where your compactor will be installed. The cabinet opening should be square. You should be able to fully open the compactor drawer. Six inches (15.2cm) of clearance is needed on the right side of compactor drawer to be able to remove the compactor bag. Allow 23 inches (58.4 cm) in front of the compactor to remove drawer.
WARNING
Fire Hazard
Do not let any item fall or collect behind the compactor.Failure to follow this instruction could result in a fire.Cutout dimensions | Product | Clearance dimensions |
| look of your compactor may vary. |
|
TroubleshootingTips Installation Instructions Operating Instructions SafetyInstructions
Grounded electrical outlet must be 3″ (7.6 cm) min. from either side wall.
18″ min.
24″ min.(45.7 cm)
(61 cm)
(38.4 cm)
(87 cm)
(86.7 cm)
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
| |||||||
24″ min. | |||||||||
|
| (38 cm) |
|
|
|
| |||
|
|
|
|
|
| (61 cm) | |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
23″ (58.4 cm) Clearance in front of the compactor is needed to fully open or remove the compactor door.
6″ (15.2 cm) Clearance to the nearest vertical wall on the right side of the compactor is needed to remove bag.
ConsumerSupportustoervice
Tools and Materials Needed for Installation
■ Level | ■ Pliers | ■ Measuring tape |
■ Phillips screwdriver | ■ Utility knife | ■ 5/16″ |
■ | ■ Scissors | ■ Gloves |
Parts Supplied for Undercounter
■ 2 mounting clips | ■ 2 mounting screws |
| #8 - 18 x 1/2″ |
10