Setup

Install Front Pointer Instructions

1.Locate an area on the vehicle to mount the Road- Pak pointer system that will allow the user to see the indicator rod from the driving position or with the help of the Road View Camera System.

ti16408a

2.If needed, drill two 9/16 in. holes in the desired loca- tion.

3.Assemble mounting bracket (355) to desired loca- tion with bolt (359), washer (360), and nut (361).

361

5.Slide support bar (351) through brackets (355) and tighten fasteners to secure in place.

355

351

ti17000a

6. Assemble extension clamp to support bar.

ti16925a

7.Insert indicator rod (362) into guide extension arm (352) and secure in place with knob(354).

8.Adjust the indicator rod by loosening extension clamps and sliding the guide extension arm (352) to desired position. Secure by tightening knob (354).

360

355

359

ti16927a

4.Hand tighten lock bar (6) to mounting bracket (355) with bolts (357) and nuts (358).

358

6

357

ti16926a

Install and Align Front Mechanical Guidance System (Optional)

See Guidance System manual.

Install and Align Video Guidance System (Optional)

See RoadView Camera System manual.

Install Winch Kit (Optional)

See Winch Kit manual.

18

3A1214B

Page 18
Image 18
Graco 3A1214B Install Front Pointer Instructions, Install and Align Front Mechanical Guidance System Optional