Setup

RoadPak Mounting Bracket (24G627) Installation (Option 2)

ti16441a

NOTE: Cutting the RoadPak mounting arms and bolting them through the bed to the frame of the vehicle is an option in addition to the following mounting techniques:

ti16661a

Narrow Orientation

ti16656a

1.Slide the RoadPak mounting arms (304) between the two fork lift channels in the frame.

304

ti16917a

2.Depending on where the RoadPak is located on the vehicle determines which holes to bolt through on the RoadPak frame. There are 8 possible mounting holes for each mounting arm. Fasten to at least two holes on each side.

ti16659a

3.Hand-tighten bolts (312), nuts (315), and washers (307) to mounts.

312 307

315

ti16660a

10

3A1214B

Page 10
Image 10
Graco 3A1214B important safety instructions RoadPak Mounting Bracket 24G627 Installation Option, Narrow Orientation