13.Open only spray gun ball valves corresponding to paint pumps or color used. NOTE: Never open both valves on the
14.Place empty pail under spray guns to catch drainage from spray guns.
15.Turn guns on with Programmable Skipline Controller.
16.Set hydraulic valves to ON position to activate pumps.
Operation
17.When water/solvent comes out of spray gun, set hydraulic valve to OFF position.
18.Turn off guns with Programmable Skipline Controller.
19.Shut off engine and Programmable Skipline Control- ler.
20.Leave paint pump dump valves and spray gun ball valves open.
21.Remove and secure ground strap from earth ground.
ti16920a
3A1214B | 25 |
