Operation
Start Engine
Gasoline is extremely flammable and explosive under certain conditions. Fuel could spray from the fuel line connector when it is disconnected from engine. Fuel could come in contact with the hot muffler and cause fire or explosion. To reduce the risk of fire or explosion, always vent the fuel tank and allow engine muffler to cool before you disconnect the fuel line.
1.Set POWER ON/OFF on Programmable Skipline Controller to ON.
2.Set engine to choke position ON.
3.Set throttle to half speed and turn key.
2.Slowly turn pressure control clockwise until pump begins to stroke.
ti16922a
3.When flushing fluid comes out of return lines, set hydraulic valve to OFF position.
ti15838a
4. After engine starts, set choke to OFF.
Select/Prime Pumps
1. Open hydraulic valve to activate pumps.
4. Place suction hoses in paint drums.
ti16645a
5. Open hydraulic valve to activate pumps.
ti16920a
ti16920a
22 | 3A1214B |
