Graco 3A1214B Introduction and General Information

Introduction and General Information

3A1214B 5

Introduction and General Information

This manual and those listed below provide pre-setup

requirements, parts lists, setup, operation, and mainte-

nance instructions for the RoadLazer system. This man-

ual includes instructions for a 2-pump system. For

1-pump systems, all parts remain the same with the

exception of plugged ports for missing pumps and

hoses.

The RoadLazer is mounted to a vehicle and is used to

stripe up to two stripes in one or two colors with glass

beading.

The RoadLazer consists of a Programmable Skipline

Controller, Displacement Pumps, two Paint Spray Guns,

and two Bead Spray Guns.

The Programmable Skipline Controller consists of the

control box and a 30 ft cable. It is the main control for the

RoadLazer system and turns the spray guns and acces-

sories on and off.

The Front Mechanical Guidance System provides the

user with a pointer for alignment on either the left or right

side of the vehicle.

The Video Guidance System provides the user with

video of a bore sight view for alignment on either the left

or right side of the tow vehicle. The system consists of a

9 in. monitor, interfacing cables, video camera and

mounting bracket.

The RPS 2900 Hydraulic Pump supplies paint to the

spray guns. There are two displacement pumps. Two

displacement pumps allows the user to have a two-color

system.

The Paint Spray Guns are pneumatically triggered to

spray paint stripes when commanded by the Program-

mable Skipline Controller.

The Bead Spray Guns are pneumatically triggered to

spray reflective materials when commanded by the Pro-

grammable Skipline Controller.