MACRO range installation manual. Issue 6 |
|
| |||
|
|
|
|
|
|
|
| FACILITY | USAGE or FUNCTION |
|
|
|
| Audio gain | Sets the level of amplification of incoming signal. Influenced by no other adjustment |
| |
|
| Chime level | Determines the level of chime tone to be injected. Influenced by no other adjustment | ||
|
| VOX sensitivity | Sets level of audio input at which the VOX circuit is triggered. Influenced by ëAudio gainí. | ||
|
|
| Temporarily set sensitivity to maximum, and set Vox delay to maximum to enable ëAudio levelí to | ||
|
| VOX delay | be set using typical input signal, then reset ëVOX sensitivityí and then ëVOX delayí. | ||
|
| Determines the time delay between cessation of audio input signal and release of priority and/or | |||
|
| Chime frequency | muting of channel. Influenced by Audio gain and VOX sensitivity. Adjust those first. | ||
|
| Sets collective pitch of chime sequence. Tones may not be adjusted individually. Influenced by | |||
|
| Bass cut link | no other adjustments. |
|
|
|
| Cut this link to introduce a sensitivity | |||
|
| Sensitivity link | applications. |
|
|
|
| Cut link to change the scope of Audio gain adjustment to | |||
|
| Priority/passive jumpers | See relevant information on page 12 |
|
|
|
| Timer duration | Sets period of | ||
|
| Output level | and tone ceases. Influenced by no other adjustments. |
|
|
|
| Sets level of audio tone output from module. Influenced by no other adjustment. | |||
|
| Tone generator frequency | Sets audio pitch of tone generation sequence. Influenced by no other adjustments. | ||
|
| ALC threshold level | See Factory Fitted Options - Automatic level control, on page 21. | Influenced by no other | |
|
| ALC sensitivity | adjustmen on this module. | Influenced by no other | |
|
| See Factory Fitted Options - Automatic level control, on page 21. | |||
|
| Surveillance tone level | adjustment on this module. |
|
|
|
| See Factory Fitted Options - Line surveillance on page 22. Influenced by no other adjustment on | |||
|
|
| this module.s |
|
|
|
| Table 2 Module adjustments and settings |
|
| |
|
|
|
Fig. 3 Location of priority sequence setting switches
Page 11