Manuals / NAD / Home Audio / Stereo Amplifier

NAD 163AV Specifications, Av Tuner Preamplifier, Decoding Formats, Sampling Rates, Pre-Ampsection

Models: 163AV

1 33

Download 33 pages 56.66 Kb

Page 32

SPECIFICATIONS

AV TUNER PREAMPLIFIER	T 163

Decoding Formats	Dolby Digital, Dolby Pro Logic II, DTS-ES, NEO:6, Dolby EX

Sampling Rates	32 kHz, 44.1 kHz, 48 kHz, 96 kHz (PCM)

PRE-AMP SECTION

Input sensitivity and impedance	400mV / 50k ohms

IM distortion	0.08%

Total harmonic distortion	0.08%

Frequency response	5 to 20,000 Hz ±0.8dB

Signal/noise ratio; ref to 2V output	> 90dB

Signal/noise ratio; ref 500mV Input / 500mV output	> 80dB

Remote Control	HTR 2 / ZR 2

Maximum output level	> 5V RMS

Output Impedance	< 100Ω (PRE OUT)

TUNER SECTION

Input sensitivity Mono	16.1dBf

50dB Stereo:	36.1dBf

Harmonic Distortion; FM Mono	0.25%

Harmonic Distortion; FM Stereo	0.5%

Signal / noise; Mono	60dB

Signal / noise; Stereo	55dB

Stereo separation at 1kHz	40dB

Frequency Response; ± 1.5dB	30Hz - 15kHz

PHYSICAL SPECIFICATIONS

Dimensions (W x H x D)	17-1/8 x 5-15/16 x 15-3/8"
	(435 x 150 x 399 mm)

Net Weight	17.6 lbs (8 kg)

Shipping Weight	22.4 lbs (10.2 kg)

Specifications are subject to change without notice. For updated documentation and features please log onto www.nadelectronics.com for the latest information about your T 163.

32

Image 32

NAD 163AV Specifications, Av Tuner Preamplifier, Decoding Formats, Sampling Rates, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz PCM

Contents

ENGLISH AV Tuner PreamplifierSAFETY INFORMATION EXPLANATION OF GRAPHICAL SYMBOLSPRECAUTIONS INSTALLATIONELECTRIC POWER MAINTENANCEDAMAGE REQUIRING SERVICE DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELFTABLE OF CONTENTS TABLE OF CONTENTSENGLISH GETTING THE MOST FROM THE NAD TTABLE OF CONTENTS UNPACKING AND SETUP CONNECTING AM ANTENNAWHAT’S IN THE BOX CHOOSING A LOCATIONABOUT THE T E.A.R.S., MATRIX AND DIGITAL SURROUNDEASE OF USE INTEGRATIONABOUT THE T ABOUT THE HTR 2 SYSTEM REMOTE CONTROLUPGRADABILITY ENGLISH QUICKSTARTPLAY A DVD MOVIE FRONT PANEL 8 SEARCHENGLISH Digital Input JackFRONT PANEL REAR PANEL ENGLISH 9AUTO TRIGGER SWITCH: When in the AUTO position, forces the T 163 to turn on only when a trigger signal is present at the trigger input. When in the OFF position, the trigger inputs are disabledREAR PANEL CONNECTING THE T 163 TO A MULTI-CHANNELAMPLIFIER SETTING UP THE T GETTING STARTEDDEALING WITH HUM AND NOISE ENGLISHINPUT SETUP INPUT SETTINGSDISPLAY THE OSD NAVIGATING THE OSD AND MAKING CHANGESSPEAKER SETUP SPEAKER SETTINGSLISTENING MODE Front L/RCHANNEL-BALANCETEST SETUP USING AN SPL METERSETTING CHANNEL BALANCE SETTING SPEAKER DISTANCECREATING AND USING PRESETS CREATING PRESETSRECALLING PRESETS ENGLISHUSING THE T ADJUSTING THE VOLUMESELECTING SOURCES MUTING THE SOUNDTUNING STATIONS SETTING RADIO PRESETSSELECTING RADIO PRESETS SELECTING THE RADIOABOUT DTS AND DOLBY DIGITAL SURROUND MODES DTS DIGITAL SURROUNDDTS-ESEXPANDED SURROUND DTS ES DTS-ESDISCRETEDOLBY PRO LOGIC DOLBY PRO LOGIC II SURROUNDDOLBY PRO LOGIC II MOVIE DOLBY PRO LOGIC II MUSICDISPLAYING THE SIGNAL MODE SELECTING LISTENING MODESEnhanced-Stereo2 ST2 Dolby Digital Dolby Digital EXADJUSTING LISTENING MODES Dolby Pro Logic II PLIIDTS Neo Stereo HDCD stereo PCM Downmix Dolby DigitalSURROUND SOUND CHANNEL CHART ADJUSTING CHANNEL LEVELS “ON THE FLY”TO ADJUST CHANNEL LEVELS ADJUSTING THE TONE CONTROLSUSING THE HTR 2 REMOTE CONTROL SPECIFICATIONSLearns up to 352 commands Configurable punch-throughCOPY A COMMAND FROM ANOTHER KEY MACRO COMMANDSPUNCH-THROUGH RECORDING MACROSKEY-ILLUMINATIONTIMEOUT FACTORY RESETDELETE MODE LOADING CODE-LIBRARIESUSING THE ZR 2 REMOTE CONTROL TRIGGER SETUPSUMMARY OF HTR 2 MODES ASSIGNING THE TRIGGER OUTPUTPOSSIBLE SOLUTIONSS TO FRONT-PANELCOMMANDSPower button and unplug it from the AC OR REMOTE CONTROLSPECIFICATIONS PHYSICAL SPECIFICATIONSAV TUNER PREAMPLIFIER Decoding Formats2003 NAD Electronics International T 163 Manual GB 09/03 China