NAD C320BEE owner manual Tuner Control

Other than the commands relating to the NAD C320BEE amplifier itself, there are other buttons, which will operate most NAD CD players and Cassette decks equipped with IR link.

TUNER CONTROL

(for use with NAD Tuner)

Switch the small slider-switch to TUNER (at the base of the remote) to control the numeric keypad 1 through +10

The TUNER button selects between AM and FM.

TUNE MODE in conjunction with or selects respectively between number station preset and scanning for stations.

CD PLAYER CONTROL (for use with NAD CD Player)

Switch the small slider-switch to CD (at the base of the remote) to control the numeric keypad 1 through +10

engages Pause.

engages Stop.

engages Play or toggles between Play and Pause.

or engages Track skip; Press once to respectively go the next track or to return to start of current or previous track.

NEXT DISC Go to next disc (for NAD CD changers).

NOTE

Direct sunlight or very bright ambient lighting may affect the operating range and angle for the remote control handset.

1 Press inand lift tab to remove battery cover from recess

2 Place batteries into recess. Ensure that the alignment of the batteries matches the ‘+’ and ‘-’ symbols on the casing.

3 Replace battery cover by aligning and inserting the two tabs into the holes. Press battery cover into place until it clicks closed.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

7