IDENTIFICATION OF CONTROLS
TNR 1 REMOTE CONTROL
1
3
4
6
7
9
10
DISP
BLEND
2
5
8
11
1ON: Power up C 426 from standby mode.
2OFF: Switch C 426 to standby mode.
3
4DISP: Show RDS PS, RDS PT, Preset name or station frequency as applicable.
5SLEEP: Set sleep mode timer.
6PRESET: Step up or down between stored radio presets.
7TUNE: Tune forward or backwards.
8FM/AM: Select AM or FM band.
9BLEND: Activate or deactivate BLEND feature.
10FM MUTE: Activate or deactivate FM MUTE FM STEREO mode.
11DIMMER: Reduce, turn off or restore VFD brightness.
ENGLISH
SLEEP MODE
The Sleep Mode timer will switch the C 426 to standby mode automatically after a preset number of minutes. Toggle TNR 1’s [SLEEP] key to select through the following Sleep mode timer settings – SLEEP 30, SLEEP 60, SLEEP 90 and OFF. Stop at the desired Sleep mode timer setting. A corresponding “SLEEP” icon will be illuminated in the VFD.
While at SLEEP time mode, pressing the TNR 1’s [SLEEP] button once will display the remaining minutes (i.e. “SLEEP _ _”; “_ _” is the number of minutes remaining) before the C 426 goes to standby mode.
To cancel the sleep mode, continue pressing the TNR 1’s [SLEEP] button until “OFF” displays on the VFD. Switching the C 426 to standby from either the TNR 1’s [OFF] button or the front panel Standby button will also cancel the sleep mode.
DIMMER
The VFD brightness can be adjusted in three ways. Toggle the [DIMMER] button to reduce, turn off or restore VFD brightness.
9
