NAD C515BEE Introduction, Getting Started, English, Français Español Italiano, Quick Start

ENGLISH

INTRODUCTION

GETTING STARTED

UNPACKING AND SETUP	QUICK START
WHAT’S IN THE BOX	In case you simply cannot wait to experience the performance of your new
	NAD C 515BEE, we provide the following “Quick Start” instructions to get
Packed with your C 515BEE you will find:	you underway.
• An audio cable connector
• The CD 7 remote control with 2 (two) AAA batteries	Please make all the connections to your C 515BEE with the unit unplugged.
• This owner’s manual	It is also advisable to power-down or unplug all associated components
	while making or breaking any signal or AC power connections.
SAVE THE PACKAGING

FRANÇAIS

ESPAÑOL

ITALIANO

DEUTSCH NEDERLANDS SVENSKA

РУССКИЙ

Please save the box and all of the packaging in which your C 515BEE arrived. Should you move or otherwise need to transport your C 515BEE, this is by far the safest container in which to do so. We’ve seen too many otherwise perfect components damaged in transit for lack of a proper shipping carton, so please: Save that box!

CHOOSING A LOCATION

Choose a location that is well ventilated (with at least several inches to both sides and behind), and that will provide a clear line of sight, within 25 feet/8 meters, between the C 515BEE’s front panel and your primary listening/viewing position. This will ensure reliable infrared remote control communications. The C 515BEE generates a modest amount of heat, but nothing that should trouble adjacent components. It is perfectly possible to stack the C 515BEE on top of other components.

NOTE ON INSTALLATION

IMPORTANT! Install the C 515BEE Compact Disc player on a level, vibration- free surface. Severe vibration or operation in a tilted position may cause the player to mis-track. The player may be stacked with other stereo components, as long as there is adequate ventilation around it. If the

C 515BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or a television set, the operation of its digital circuits may produce static that would interfere with reception of weak broadcast signals. If this occurs, move the C 515BEE away from other devices or switch it off when viewing or listening to broadcasts.

PLAY A CD

1Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line Output jacks to the corresponding CD inputs on your amplifier.

2Plug in the AC power cord.

3Press the POWER button to turn ON the player.

4Press [OPEN/CLOSE] to open the disc drawer.

5Place a CD, label side up, in the tray’s circular recess. Be certain that the disc is centered within the recess.

6Press [PLAY]. The drawer closes automatically, and the disc begins to play.

7 At any time you may press [SKIP	or	] to select different tracks on
the disc.

8Press [PAUSE] if you want to stop play temporarily while keeping the pickup at its current position on the disc. Press [PAUSE] again or [PLAY] when you want to resume playback. Press STOP if you want to end play and reset the pickup to the beginning of the disc.