NAD C515BEE owner manual Identification Of Controls, Front Panel, English Français, Русский

IDENTIFICATION OF CONTROLS

FRONT PANEL

1 2

5 6 7 8

3 4 9 10

ENGLISH

FRANÇAIS

1POWER: Press this button to switch ON the C 515BEE. The Standby LED indicator will turn from amber to blue and illuminate the Vacuum Fluorescent Display (VFD). Pressing the power button again turns the unit back to standby mode.

The C 515BEE can also be switched ON from standby mode by pressing [OPEN/CLOSE] or [PLAY] button on the front panel as well as on the remote control.

If the disc tray is open and the C 515BEE is powered OFF, the disc tray will draw close and the unit powered OFF.

2INDICATOR: This indicator will light up amber when the C 515BEE is in standby state. When the C 515BEE is at ON state, this indicator will illuminate blue.

3DISC TRAY: With the DISC TRAY open, insert a CD or other compatible media disc face down onto the tray.

“No Disc” appears on the C 515BEE’s VFD if the disc is placed upside down.

4REMOTE SENSOR: Point the CD 7 at the remote sensor and press the buttons. Do not expose the remote sensor of the CD 7 to a strong light source such as direct sunlight or illumination. If you do so, you may not be able to operate the C 515BEE with the remote control.

Distance: About 23ft (7m) from the front of the remote sensor.

Angle: About 30o in each direction of the front of the remote sensor.

5VFD: The Vacuum Fluorescent Display (VFD) provides playback information, settings and other indicators.

6PLAY: Press to start play or to resume play after Pause. If the disc tray is open, press this button to automatically close the tray and start playback if a disc is loaded.

7PAUSE: During playback, press this button to stop playback temporarily, keeping the optical pickup at its current position on the disc. To resume playback at the exact point where it stopped, press [PLAY] or [PAUSE] again.

8STOP: Press the [STOP] button once to stop playback and re-set the pickup to the beginning of the disc. The display reverts to showing the

number of tracks and total playing time on the disc. If the C 515BEE was programmed to play a selection of tracks, the program will be retained in the player’s memory.

Pressing [STOP] twice at program mode will delete the program.

9OPEN/CLOSE: Press this button to open and close the disc tray. When in standby, this button will also power ON the C 515BEE and at the same time open the disc tray.

10SKIP/SCAN: Press to skip forward or to skip backward a track or file.

Press and holdorfor more than 2 seconds to search up or down a track. The SCANbutton causes the optical pickup to scan

backwards through the recording at high speed. The SCANbutton causes the optical pickup to scan rapidly forward through the music.

ESPAÑOL

ITALIANO

SVENSKA NEDERLANDS DEUTSCH

РУССКИЙ