DISASSEMBLY INSTRUCTIONS
1.Remove machine screws M 4.0 x 6.0 ( 1 to 4 ) from the side panels. Remove tapping screw 3.0 x 8.5 ( 5 )from the back panel.
Refer to Figure No.1.
4 | 5 |
3
2
Figure No.1
1
2. Pull both sides of the TOP COVER slightly outwards 6 and tilt approx. 35˚ and then remove in the direction as indicated by the arrow 7 . Refer to Figure No.2.
6 | 7 |
|
Figure No.2.
6
- 6 -