Chariot Carriers CX 2, CX 1 manual Assembly and folding up, Assembling the Ready Chassis

4.2 Assembly and folding up

Assembling the Ready Chassis

Push down the axle socket with your left hand, and at the same time push up the left frame tube using your right hand. Then pull the short lower side tube backwards with your left hand, pressing against it from above with your right hand. Repeat this procedure on the right-hand side.

When pulling the short lower side tube backwards, the auto-lock disk must audibly engage in each case.

The assembly of the CX requires particular attention. Care needs to be taken here that the brake cable (see Section 3.10) is not bent or damaged in some other way. It must run along the frame tubes as illustrated.

Auto-lock disk

DANGER

Take care not to bend the brake cable which connects the handlebar with the passenger compartment on the CX. This might reduce the braking effect, or the brake may not even continue to function.

DANGER

Before each journey make sure that both auto-lock disks are engaged. If this does not happen, the passenger com- partment may collapse unintentionally and injure your child and/or cause you to lose control of the carrier.

7