Chariot Carriers CX 1, CX 2 manual Length adjustment of the ski arms, Putting on the waist belt

Length adjustment of the ski arms

The ski arms are adjustable for length. To do this, withdraw the security pin which connects the two ski arm tubes.

Move both tubes towards each other until the desired holes in both tubes align with each other.

Reinsert the security pin, pushing it in until it goes no further.

DANGER

Always make sure that the security pins which connect both tubes of the drawbar are properly inserted in to prevent the carrier from accidentally sliding away. You run the risk of an accident!

Putting on the waist belt

Always put the waist belt on so that the padded area is at the back and the strap with its side-release buckle is at the front. Always close the buckle with care!

Adjust the 2 straps on either side of the buckle to that it is a tight fi t around your hips, and so that the buckle is centered.

DANGER

Always make sure the buckle on the strap is securely closed and the strap fi ts tightly. If this is not done, the XC Skiing Carrier might get separated from you and slide away. You run the risk of an accident!

If required, the waist belt can be adjusted for larger and smaller hips. To do this, undo both attachment screws and reinstall them into the appropriate grommets. When refi tting the screws, always use the additional self-locking nuts supplied.

DANGER

Once self-locking nuts have been loosened they cannot be reused. Once they have been loosened, they lose their se- curing function, and this can lead to unexpected loosening of the screw connection with potentially serious consequences.

46