Assembly
Attaching the skis to the carrier
Cheetah und Cougar
Remove the wheels (for this, press the rubber cap in the centre of the wheel).
To attach the skis, press the spring button in and insert the attachment axle into the axle socket until it can go no further. Release the spring button. By moving the skis from side to side, check that they are locked in the axle socket and cannot be pulled off.
CX
To attach the XC Skiing Kit to the carrier, fi rst remove the carrier wheels.
Then attach the clear protective caps over the exposed drum brake calipers.
Pressing down the axle’s locking button, pull the axle all the way out of the wheel hub.
DANGER
Always make sure that the ski tips point towards the front.
DANGER
Before each journey make sure that the skis are securely locked in the axle socket.
Pressing down the locking button, insert the axle through the socket at the top end of the ski frame.
Make sure that you insert the axle from the outside inwards, looking in the direction of the ski tip.
44
