Chariot Carriers CX 2, CX 1 manual Adjusting the padded shoulder harness

Models: CX 1 CX 2

1 52
Download 52 pages 54.15 Kb
Page 11
Image 11

12.On each side of the buckle, the waist belt has a loose belt end for adjusting to fi t correctly on the child. Adjust the waist belt until it is tight and the buckle is in the centre in front of the crotch belt.

13.Finally check that all belts are tight. However, avoid putting too much pressure on the child’s body.

14.Make sure that the padded shoulder harness’s belt position is correctly adjusted, as described below.

padded shoulder harness

buckle of the shoulder harness ( under tab)

lap belt

crotch harness

Adjusting the padded shoulder harness

To achieve the correct size of the padded shoulder harness, sleeve through or remove the shoulder belts with the plastic buckle through these adjustment loops, as indicated below:

XS: Do not sleeve through any adjustment loops; thus unsleeve the shoulder belts from all loops.

S:Only sleeve through the lowest webbing loop. When sized for XS and S, the un-used, upper sections of the shoulder harness go loose over the children‘s shoulders. Smooth them down their back for comfort.

M:Sleeve through both webbing loops. This is the default setting.

L:Sleeve through both webbing loops and the top cord loop.

TIP

Always sleeve or unsleeve the shoulder belts as descri- bed above equally on both sides of the padded shoulder harness, otherwise the shoulder harness will not sit properly, and correct fi t of the seatbelts is not possible.

11

Page 11
Image 11
Chariot Carriers CX 2, CX 1 manual Adjusting the padded shoulder harness