Chariot Carriers CX 1, CX 2 manual Attaching the carrier

Attaching the carrier

From the front, insert the elastomer ball, which is attached to the hitcharm, into the Axle-Mount ezHitch.

Pull the hitch ball rearward to the end of the socket in the axle mounted hitch cup.

1

2

Push the security pin from the top through both holes of the Axle-Mount ezHitch.

Secure the pin by pulling the hole of the rubber tab over the protruding end of the pin.

4

5

Finally, always attach the hitch’s back-up safety strap around the bicycle frame. To do this, from above, put the hitch back-up safety strap around the chain stay, and attach the hook of the hitch back- up safety strap to the hitcharm D-ring located on the underside of the hitcharm.

3

6

30