14
INPUT SELECTOR
•From the OSD’s <AUDIO SETUP MENU> screen, select the <INPUT SETTINGS> menu item using the
HTR L73 remotes’ and “Enter” keys.
•Using the keys select the video input (DVD, SAT, VCR, and VIDEO 4) you wish to configure.
•Use the keys to move to the <AUDIOIN> line, and then use the keys to select the analog
audio input you wish to be linked to that input (usually, this will be the same, i.e., “VCR” with “VCR,”
“Video 4” with “Video 4,” and so on).
NOTE
It is not necessary to have an analog audio input connected for every video input you employ. In fact,
in some cases-for example for a CAB/SAT-it may be preferable to make only a coaxial or optical digital
audio link to the L73 for audio playback. This avoids possible confusion, and ensures that the L73’s
high-performance surround and digital audio circuitry will always be employed.
•Now use the keys to move to the <DIGITAL INPUT> line and select the digital input you wish
linked to that input.
•If you set <DIGITAL INPUT> to “ANALOG,” no incoming digital signal will be selected by that input.
(Set an input’s <DIGITAL INPUT> to “ANALOG” only if you wish to ensure that that input will not play
an incoming digital bit stream, even if one is present.)
NOTE
•That signals from digital inputs are not available on the analog VCR OUT jacks.
SETTING UP THE L73
Setup
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
L73_eng.qxd 7/3/05 7:59 pm Page 14