OSD (ON SCREEN DISPLAY)
When your NAD Surround sound Receiver is connected to a television, you can operate the unit with the remote control by making selections from
Before using the
• VIDEO : Set the switch to this position when using the yellow VIDEO MONITOR OUT jack.
•
The
AUTOMATIC OSD FUNCTIONS
If the receiver is connected to a television with a video cable from the monitor out jacks, the following functions when used , will appear
SLEEP
Pressing the SLEEP button on the remote control brings up a display that allows you to select the amount of time from 90 to 0 minutes after which the system will shut itself off. Once the display appears, each time you press the SLEEP button reduces the time in ten minute increments. At zero, pressing the SLEEP button again starts the sequence over at 90 minutes. Without input, the display will disappear in 7 seconds.
VOLUME
Pressing the MASTER VOLUME button on the remote control brings up a display that shows the receiver volume selected.
INPUT STATUS
When you turn your receiver’s power on or change its functions, a display appears on your television screen showing the current status of the system, including the type of video and audio input being monitored, the type of audio output.
With this display
ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH
VIDEO
DVD
AUDIO
DVD
VIDEO 1
VIDEO 1
VIDEO 2
VIDEO 2
PORTUGUÊS
TUNER |
|
|
| TAPE |
|
|
| AUX |
|
| |||||||
|
|
|
|
|
|
|
|
|
SVENSKA
19
