NAD L 76 Punch-Through, Copy A Command From Another Key, Macro Commands, Remote Control Unit

REMOTE CONTROL UNIT

PUNCH-THROUGH

The HTR L76's "punch-through" function allows you to retain a function key from one Device Select "page" on another, so that, for example, the AMP "SURR MODE" function might still control the L76 when the DVD Device Selector page is active

NOTE

The HTR L76's "VOL" and "MUTE" keys are preprogrammed as "punched-through" for all Device Select pages: "VOL" will operate the L76's master-volume regardless of the currently selected device. The "SURR." "CENTER," and "SUB" Channel Volume controls similarly are pre-programmed as punched-through. To set a punch through, after entering the Learning Mode, and pressing the desired key to be punched-through, simply press the device key twice of the device to punch through to. The status LED will turn green; press the Device Selector key again to exit Learning Mode.

Example: Punch-through the from the DVD "page" to the AMP "SURR MODE" key:

• On the HTR L76, simultaneously press-and-hold "DVD" and (OPEN/CLOSE); the Learn LED turns steady green.

•Press "SURR MODE"; the Learn LED turns amber.

•Press "AMP" twice; the Learn LED turns green.

•Press "DVD" again to exit the learning mode.

COPY A COMMAND FROM ANOTHER KEY

You may copy a command from any HTR L76 key to any other. To copy a key function, after entering the Learning Mode, and pressing the desired key to be copied to, simply press the device key from which you wish to copy, having first pressed its Device Selector key if it resides on another "page." The status LED will turn green; press the Device Selector key again to exit Learning Mode.

Example: Copy the Pause command from the DVD page to the AMP					key:
•	On the HTR L76, simultaneously press-and-hold "AMP" and			(OPEN/CLOSE); the Learn LED
	turns steady green.
•	Press	(pause); the Learn LED turns amber.
•	Press "CD"; press		(pause); the Learn LED turns green.
• Press "AMP" again to exit the learning mode.

NOTE

The copy and punch-through functions are similar. However, if you copy a command and then subsequently delete, or over-write the original (source-key) command, the copied-to key's command remains unchanged. If you punch-through to a command and then delete or over-write the original key, the punched-through functions also change accordingly.

MACRO COMMANDS

A "macro" command is a series of two or more remote codes issued automatically from a single key press. You might use a macro to automate a simple command sequence, such as, "Turn on the DVD player and then press 'play." Alternatively, you might compose an elaborate macro to power up an entire system, select a source, choose a SURROUND MODE, and begin playback-again, all from a single key press. The HTR L76 can store one macro on each of its function keys (these exclude the Device Selector keys).

NOTE

Macros are independent of the currently selected device.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

25