ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA

Reference

TROUBLESHOOTING

Check the following guide for the possible cause of a problem before contacting service.

SYMPTOM

CAUSE

CORRECTION

 

 

 

No power.

• The power cord is disconnected.

• Plug the power cord into the wall outlet securely.

 

 

 

 

 

The power is on, but the DVD player does not

• No disc is inserted.

• Insert a disc. (Check that the DVD or, audio CD

work.

 

indicator in the display window is lit.)

 

 

 

 

 

No picture.

• The TV is not set to receive DVD signal output.

• Select the appropriate video input mode on

 

the TV.

 

 

 

 

 

 

• The video cable is not connected securely.

• Connect the video cable securely.

 

 

 

 

• Unit output setting and TV resolution capabilities

• Check TV capability.

 

mismatch.

• Check mode of connections (eg. S-Video,

 

 

Component etc.).

 

 

• Check unit Resolution setting according to TV

 

 

capability and mode of connection.

 

 

 

No sound.

• The equipment connected with the audio cable

• Select the correct input mode of the audio

is not set to receive DVD signal output.

receiver so you can listen to the sound from the

 

 

 

DVD player.

 

 

 

 

• The power of the equipment connected with the

• Turn on the equipment connected with the

 

audio cable is turned off.

audio cable.

 

 

 

 

• The AUDIO options are set to the wrong

• Set the Digital Audio Output to the correct

 

position.

position, then turn on the DVD player again by

 

 

pressing POWER.

 

 

 

 

• The Digital Audio Output mismatch with the

• Select the proper audio setting in AUDIO setup.

 

amplifier.

 

 

 

 

The DVD player does not start playback.

• An unplayable disc is inserted.

• Insert a playable disc. (Check the disc type, color

 

system, and regional code.)

 

 

 

 

 

 

• The rating level is set.

• Cancel the rating function or change the rating

 

 

level.

 

 

 

The remote control does not work properly.

• The remote control is not pointed at the remote

• Point the remote control at the remote sensor of

sensor on the DVD player.

the DVD player.

 

 

 

 

 

• The remote control is too far from the DVD

• Operate the remote control closer to the

 

player.

DVD player.

 

 

 

 

• The remote control batteries are dead.

• Replace the remote control batteries.

 

 

 

30

Page 32
Image 32
NAD T515 owner manual Troubleshooting, Symptom Cause Correction